The Primo water dispenser is a popular choice for those who want a clean and healthy way to drink their water. However, if not cleaned regularly, it can become dirty and covered in bacteria. In this article, we will show you how to clean a primo water dispenser quickly and easily. Let’s get started!
Clean the outside of your water dispenser with a damp cloth
Clean the water reservoir by removing it, taking off the filter screen and washing with hot soapy water Wash the lid with a sponge or dishcloth
Pour out any remaining water Clean the contacts with a cotton swab dipped in alcohol or white vinegar.
This is where you would wish to leave information for your readers, like “if you want to clean the inside of your water dispenser, consult our article on how to clean prim
Remove any leftover food from the inside of the reservoir
Remove any leftover food from the inside of the reservoir before you begin to clean it. This is because after cleaning if there are juices or food pieces that remain in the reservoir then your primo water dispenser will attract insects.
Remove any leftover food from pitcher. If there are leftovers, take them out and scrape them off with a utensil or tissue paper.
Clean pitcher with hot water and hand dishwashing liquid. Use a soft sponge when cleaning the inside of your primo water dispenser.
Add a solution of hot water and vinegar to clean out any buildup on the inner lining
Clean and dry all components thoroughly and put them back into the dispenser
Step 1: Fill a large bowl with white vinegar. Vinegar is great for killing mold spores, so this will clean out the interior of any bacteria that have been building up over time. Place it on top of a towel to prevent damage to furniture or countertops. Let the vinegar soak for 15 minutes.
Step 2: Pour out the vinegar and wipe away debris with a clean, dry cloth. If there is any build-up on the dispenser’s exterior, feel free to use any general household cleaner or even scrub it off with baking soda. You can also run hot water over the exterior of the dispenser
Rinse off all parts with warm, soapy water
The first step is to rinse your water pitcher and all parts with warm soapy water.
Pour a bleach solution into the pitcher & let sit for 1 hour
Fill a bowl or bucket with a clean, bleach solution consisting of 4 capfuls of bleach per gallon of purified water. Submerge the faucet valve assembly in this mixture for 1 hour.
Rinse off parts with water after letting it sit for 1 hour
After the faucet valve assembly has sat in the bleach solution for an hour, rinse all pieces well with clean, purified water to remove any remaining traces of bleach.
Allow faucet valve assembly to air dry completely before using again. Let the faucet valve assembly air dry completely before reassembling. Rinse pitcher & parts with warm soapy water again after letting dry fully.
Allow it to dry completely before putting it back together again!
Last, but not least, let the water tank dry before you reassemble it.
NOTE: Cleaning your Primo Water Dispenser is largely contingent on how frequently you use it. If you only brew one or two glasses of iced tea, then cleaning duties will be minimal. However, if you brew up a pitcher of sweet tea
Conclusion
A Primo Water Dispenser is a water dispensing appliance that adds convenience to your daily life. You can get cold or hot filtered drinking water at any time of the day. All you have to do is just push the button and you will be served with fresh, clean drinking water in seconds. But how often should you clean your primo water dispenser? This article provides you with some useful information about primo water dispensers.
Leave a Reply