Installing a sink and a toilet in your outdoor office can be a difficult do-it-yourself project. You even need to have an in-depth understanding of the plumbing systems to make sure you’re doing a straightforward construction. More often, creating a sound plan from start to finish will help you get the work done right. As a matter of fact, it’s best if you get to familiarize these types of installations so you’ll know whether enlisting help from a professional is required. In this article, we’ll discuss some ways on how to add a sink and toilet to an outdoor location. So for you to take full advantage of these tips, here’s what you need to do from the get-go.
Have your outdoor office inspected
according to ToiletWire When it comes to sinking and toilet installations in your outdoor office, the first big thing that you should do is to contact a local building inspector and have your space inspected. Remember that plumbing constructions require compliance with the local building codes.
As a homeowner, you’re duty-bound to make sure that all installations are of the highest standards. And this is where a local building inspector comes in. They will ensure that all your plumbing systems follow your state’s building codes for safety reasons.
Once you’ve got in touch with your local public works department, an inspection will be scheduled. From there, you just have to wait for the inspector’s findings before getting a building permit for your construction. And if you have concerns about the results, you’re free to clarify things with the inspector.
Install water pipes
Water pipes are important when you’re adding a sink and toilet to your outside office. Besides, you can’t properly use these plumbing fixtures without an adequate supply of water both hot and cold.
For example, you can’t wash your hands nor use the toilet efficiently without a water supply. Thus, this is the reason why water pipes should be installed properly by burying them right below the frost line.
Furthermore, these water pipes should also be separated from the area where the cold is running above the ground. Another thing that should be considered in the construction of the said pipelines is that they need to be operating to your building at the least distance from the electrical wirings. That way, you’ll be able to ensure the protection of all your plumbing fixtures including your electrical cables.
On one hand, if you want hot water for your outdoor office, you can buy small hot-water heaters and put them under a sink to provide 7 – 10 liters of hot water supply. But if you also like to add cold water, your plumber needs two separate pipelines that that will allow the water to flow in and out.
Set up waste pipes
Your toilet installation will be useless without proper waste pipes. Apart from the water supply, you should also take a look at some waste options to get the most out from your toilet. For instance, you should have a waste system that can take waste away after using the toilet.
If your office is found below the current drains, then constructing a domestic pumping station will be a perfect option. However, take note that this station requires electrical power to function efficiently, hence electrical installation should also of paramount importance.
Moreover, a pumping station is significant for waste elimination. This is because it contains a small holding tank located below the ground and a water pump integrated with a macerator to pump waste to your sewer. In addition, these pumps work by moving waste over a distance using a small bore pipe.
By having these fittings in place, using the toilet even outside of your home will still be a comfortable and fulfilling experience.
Connect electrical cables
To have a smoother operation of plumbing station, electricity is of utmost consideration. This means electrical installation is a job for certified electricians. While it remains that way, electrical cables to be constructed underground must be covered with steel wire.
In fact, a better option is to have a conduit pipe for your cabin to safeguard your wires. Also, electrical connection means thinking about the gauge of cable required to run sufficient amperage even for a long-distance; separate metering, and the location where to put your RCD switches.
Since you’re adding a toilet outdoor, it’s best to dig a trench yourself so you can save money. Not only that but you may require inspection by a building officer if you choose to do a DIY electrical installation. Yet, there’s a fee to pay.
Hire a professional plumber
Of course, you can’t add a sink and toilet without hiring a licensed plumber for your project unless you’re experienced in doing so. Nevertheless, you’ll need the assistance and expertise of a licensed plumber to materialize your construction plans.
When it comes to putting sink and toilet to your outside office, be sure to ask a professional what should and shouldn’t be done to make the whole project sensible.
While plumbing installations are more likely costly, keep in mind that having a skilled plumber by your side would always be worthy of time, money and resources.
If you’re looking for someone who can work with your outdoor sink and toilet, there are numerous plumbers online that can help you.
Final Words
With an outdoor office location, it’s important to consider all your plumbing options. From your water pipelines down to your waste systems, the expertise of a plumbing specialist is a key concern. While there can be many solutions to your sink and toilet installations, the bottom line is that it’ll still add to your expenses. Hence as a homeowner, be sure everything about your construction will be done efficiently and securely. By following the tips presented in this article, you’ll be able to install these plumbing fixtures in a good and money-saving way.
Leave a Reply