Carpet cleaning solutions can now be found around every corner. However, not all of them work the same. Plus, this will depend on what kind of stain you’re dealing with in your carpet. The shelf products may not even work. The good news is, there are plenty of solutions available to make this task less daunting. NO1 Carpet Cleaning Melbourne is an expert http://www.no1carpetcleaningmelbourne.com.au when it comes to keeping carpets clean and stain-free. Here are their top 10 tips for cleaning your carpets to make sure it is nice and clean.
1. Blot the Stains
Many people make the mistake of rubbing or scrubbing when a spill or stain first starts. However, this will only push the stain even further into the carpet. This is why you may want to try a change of tactic: don’t scrub, but blot. By blotting, you are putting a small amount of pressure on the stain. This will allow you to soak it up before it spreads. Always blot from the outside to the inside of the stain, to not spread the stain further.
2. Use Shaving Cream
If you have some difficult stains to handle, then you might want to keep the shaving cream around. From food stains to dirt patches, shaving cream can be very helpful if you have a light-coloured carpet. Simply apply the shaving cream on the carpet. Then, rub it in and let it sit there for a couple of hours. When cleaning the shaving cream off the carpet, use warm water and some dishwashing soap.
3. Remove the Gum with Ice
Seeing gum get stuck on the carpet is likely the nightmare of any homeowner. That being said, before getting the scissors or starting to look up new carpets, you may want to pull the ice out first. By rubbing it on the gum, you will be able to solidify and remove it from the carpet without leaving any sticky stains.
4. Use Shaving Cream
If you have some difficult stains to handle, then you might want to keep the shaving cream around. From food stains to dirt patches, shaving cream can be very helpful if you have a light-colored carpet. Simply apply the shaving cream on the carpet. Then, rub it in and let it sit there for a couple of hours. When cleaning the shaving cream off the carpet, use warm water and some dishwashing soap.
5. Hydrogen Peroxide for Blood
Maybe you had a cooking accident, or you got a paper cut that sent blood to the carpet. The problem in that very often, blood is difficult to take out – especially after it dries. To get the blood out, loosen the stain with some mild detergent mixed with water. After you’ve gotten the “bulk” out, you need to apply some hydrogen peroxide to the blood stain. Allow it to sit for a couple of minutes, and then blot using a clean cloth (preferably white).
6. Dish Soap for Grease
Grease is one of the most difficult stains to remove from the carpet. However, if you use the right product, you can easily do it. Dish soap can remove grease from tableware and pots, so it can be used on the carpets as well. Here’s how you can need to do:
- Put a bit of dishwashing soap in a cup of water, and then pour it into a spray container.
- Spray the solution on the stain. Then, let it soak on the stain.
- Use a clean cloth or paper towel to blot it. Depending on how bad the stain is, you might need to repeat this a few times.
7. Baking Soda for Stains
Baking soda can remove stubborn stains. Cover the stain with the powder, and then pour some warm water over it. You could leave the mixture there for a couple of hours. If the stain is difficult, you could leave it overnight. Depending on how stubborn the stain is, you may need to repeat the process several times.
8. Salt for Red Wine
Red wine can leave very difficult stains on the carpet, but salt may come to the rescue. After spilling the wine, apply some salt to the wine and allow the mineral to absorb it. Once the salt starts getting a red colour, you need to vacuum it. Continue doing this until the salt evaporates. Once the wine dries up, take a mineral water solution and blot the stain.
9. Use Vinegar
Vinegar is good at removing odours, which makes it a great option if your pet had an “accident” on your carpet. Blot any potential stains with a mix of water and vinegar, or simply spray it over the smelly area. Since vinegar has disinfectant properties, it might even kill germs. Bear in mind that vinegar has slight bleaching properties, so it should not be used on darker carpets.
10. Use an Iron for Stain
You probably heard how steam cleaning can get rid of bacteria and stains, but not everyone can afford a steam cleaner. The next best thing for that is an iron, as most of them today have a steam option. Take a mix of equal amounts of water and vinegar and blot the stain. After a few minutes, put a paper towel over the stain and start ironing. The heat should help transfer the stain to the paper towel.
11. Rubbing Alcohol for Nail Polish
Rubbing alcohol can help remove various stains, such as the ones caused by nail polish. Here’s what you can do if you accidentally drop nail polish or a similar substance on the floor:
- Wait until the polish dries and chip away as much as you can.
- Next, dab the stain with a clean cloth soaked in rubbing alcohol
- Continue dabbing gently until the nail polish comes out.
The Bottom Line
Whenever you see a stain, you tend to think that this is it for the carpet. However, with the right products and cleaning techniques, almost every stain can be gotten rid of. When you can’t do it by yourself, there will always be professional carpet cleaners to help you.
Leave a Reply