How to Prevent 5 Common Electrical Hazards

The most important thing for any of us out here has to be, our own and our loved ones’ safety. We provide our family’s with everything that we believe can make their lives better. But sometimes little things that we might not find harmful can be a reason for a serious hazard. For peace of our minds and to ensure safety for our family we must be aware of every little thing that might cause a serious accident to happen.

Our lives depend a lot on electricity and every now and then there is some new appliance that we add in our electrical needs. As much as it makes our lives easier, electricity can be a serious threat to our safety if we fail to take proper security measures. We have put together a bunch of protection measures that you can take to prevent any serious electrical hazard that our society often has to face.

Following these tips will help you prevent some of the most commonly reported hazards that could have been prevented only by being a little more careful. If you are facing anything other than the below-mentioned problems then you can always contact your local 24/7 electrician Melbourne in case of an emergency.

Dry your hands before using electrical equipment

Water is a good conductor of electricity, a slight contact of your wet hands with the electricity will cause your body to convulse from the shock. Only if you wipe your hands clean off any liquid presence before touching any electrical appliance or before plugging into a socket will keep you away from any sort of danger.

More than often we come out of the shower and use the hairdryer with our wet hands. If only you dry your hands before using it will prevent any chances of an electric shock.

Also, keep all sorts of electrical appliances away from water. Do not leave your hairdryer next to the sink either. This simple caution will save you from a ton of possible disasters.

Keep the temperature of electrical appliances in check

When the electrical appliances start to heat up it could be a warning that you need to do something about it. It could be that the wires are unable to insulate the heat because it’s old. Or it could be that you need to get your circuit breaker checked because it could be overloaded.

This automatically signals that you should switch off your appliance, contact your local electrician Melbourne and get it inspected and if possible replaced.

Also, get your wiring checked it could be because of the old wiring of your house. And This indicates that it could be a warning sign that you need to get your electrical system checked, repaired or if needed replacing.

Ignoring these small signs can cost you your own and your loved one’s safety. So make sure you take your steps wisely and act immediately in such a case.

Be careful with plugs and switches

Plugs are not always well protected. Some could be protected well but some could be not. So you have to be careful around the plugs. A plug that has your appliance plugged in and if it gets overloaded then it will cause explosions and short-circuits.

You never know, the next time you plug in an appliance as small as a hairdryer and your extension cords and outlets are unable to handle too much channeling of electricity and result in exploding which in severe cases can put your house on fire.

To prevent such an incident, first, make sure you plug in the switch properly, second be careful of the signs that might show that your appliance is healing up or notice in the outlet is making sparking noises or is warm to touch and then try not to use extension cords because even if you get more outlets, the power being supplied is still the same.

Follow warning signs of your machinery

When you buy a new appliance make sure you take your time to learn about the instruction manual of your equipment. It teaches us a lot and this way we will be able to know all the possible warnings about the appliance. This simple step can save you not only your life but also your equipment.