Heating your pool is among things that can lead to excessive energy consumption. It can result in high electric bills if you do not take precautions. However, there are options that you can opt for to heat your pull without exceeding the normal energy levels. You can significantly reduce those bills as you keep your pool as warm as you may wish. Installing an energy-conserving heater is an incredible move to go about the process. This blog seeks to enlighten you on how you can reduce cost professionally, using pool covers.
How the covers work
The rate at which evaporation takes place depends on the average temperatures at the pool. The heat in the air, speed of the wind, and humidity play a primary role in determining the magnitude of evaporation. If all the contributing factors go high, the rate of evaporation still does, and vice versa.
Environmental factors may not influence an indoor pool, but it can still register significant levels of energy loss through evaporation. Installing a room ventilation system goes a long way to control humidity due to excessive evaporation. It is prudent to condition the ventilated air, which increases the cost of energy.
Using a pool cover helps minimize the rate of evaporation, from indoor and outdoor pools. If you cover your pool when not in use, you will realize that you have effectively reduced heating costs. It is possible to save up to 50% or even 70% using this method.
Using covers on indoor pools come with loads of benefits besides reducing evaporation. For example, the need to install an indoor ventilation system will no longer be a bother. Most importantly, you do not need to have the fans running when you have covered your pool, and that is an incredible way to conserve energy.
Examples of pool covers
For a pool cover, you only need a big plastic sheet. Scientifically, plastic is an ideal material when it comes to preventing the passage of vapor. However, such a paper from the stores might not be the best option. Why so? Well, handling, and storing it will come with its fair share of challenges. Among them, it will tear easily, and it will lose value soon because of direct sunlight. You can use it all the same, but ensure to change it after a season or two.
For a long-lasting solution, use a material that comes designed for pool covers. Such include polypropylene, vinyl, and UV- stabilized polyethylene. Such are either opaque or transparent. Others come in dark or even light colors.
The bubble type is an example of the cheapest pool covers. These resemble bubble-packing material, but they are thicker with UV inhibitors. You can use them in both indoor and outdoor swimming pools.
Vinyl covers come with a denser material, which can last longer as compared to the bubble type. You can also use vinyl covers, known for their flexible thin layer insulation. It comes fitted in between two vinyl layers.
How to use pool covers appropriately
Note that you should ensure the use of pool covers during the swimming season. For example, you must remove the cover before swimming, if you swim during the day. After using the pool, you should then immediately replace it.
If you swim during the night, the cover’s effectiveness depends on the balance between the solar gain reduction, and the losses that the shield prevents. However, the type of cover you decide to use and the climate conditions will influence that equilibrium. It is, consequently, gainful to use a bubble cover or a transparent one in daylight. The rate of evaporation reduces with an increase in warmth and humidity. In that condition, it is advisable to withdraw the cover during the day.
Proper use of swimming pool covers comes with other loads of benefits apart from energy conservation. They include:
- They help reduce the amount of water required by up to 50%
- Minimizes consumption of chemicals at the pool by 30% to 60%
- They help keep the pool clean, hence minimizes the time needed for cleaning
In conclusion, pools present numerous ways in which they lose energy. Evaporations contribute the highest percentage of the loss. It takes a large amount of effort for water to evaporate, and that explains the situation. The process takes away a massive amount of heat from the pool, leaving it cold. You may also hire solar pool heating Brisbane for the best services
By: Jim Pullman
About the Author:
Jim Pulman has extensive knowledge and experience in Home Building, Construction, and Design. He writes articles in his free time and partners with content creators to share his expertise with the online community.