Every house requires renovation and changing once in a while. Small fixtures and subtle redesigns are a part of every household. The same goes for the rooms in a house. We all keep changing the design and appearance of our rooms out of mere change of look or looking for a more practical space. Whatever the reason is, change is always inevitable. For instance, change the medicine cabinet in your room, replacing it with a more spacious cabinet or a newer design with mirrors and more lights. Suppose your current cabinet is a medicine cabinet with lights. In that case, it will take some technique and understanding of the procedure to disassemble it and replace it with your chosen cabinet. Here is a detailed overview of what to do when you plan on disassembling the lighted medicine cabinet in the room.
Check The Cabinet Carefully And Get Everything Ready
Before you start disassembling the cabinet, you should look at how it was built and put together. Note down what the cabinet frame is made of, how it attaches to the wall, and if it has any extras like lights or mirrors built in. This information will help you get through the process and make sure that the process goes smoothly. If the cabinet has built-in lights, you will need to detach the lights first by disconnecting the wiring. Ask for the help of any electrician if you want the safe removal of lights without damaging the electric board.
Get all the tools and materials you’ll need after assessing the cabinet, and make sure you understand what the project needs. It’s essential to set up your workspace correctly before you start the removal process. Clear the area around the medicine cabinet so you can work safely. Protective covers or drop cloths should be put down to catch any dust or debris that may gather. Also, make sure the room has enough air flow to keep dust and fumes from moving around.
Take Off The Door, Hinges And Frame
First, take the door and hinges off. With a screwdriver, carefully take the hinges off of the frame of the cabinet. Save the screws for later. Once you’ve taken the hinges off, carefully place the door somewhere safe. Also, remember to remove any handles or other hardware on the cabinet.
Now, start removing the frame of the cabinet once the door and hinges are carefully removed. Depending on the design, the frame can be attached to the wall with screws or glue. With care, take out any screws that are holding the frame to the wall. Carefully use a pry bar or wrench to separate the frame from the wall gently. Take your time so you don’t damage the wall.
Remove The Cabinet From The Wall
Now that the door and frame are removed work on the cabinet itself. Find the screws that hold the wall cabinet in place. Most of the time, they’re on the sides or top of the shelf. While using a screwdriver, carefully take out the screws, making sure to hold the cabinet the whole time. When you’re done taking out the screws, save them for later use.
After taking out the screws, it’s time to take the cabinet off the wall. The cabinet can be mounted on studs or directly to the wall, based on how it is put together. Carefully take the cabinet off the wall with the help of a pry bar or wrench, making sure not to damage the area around it. If the cabinet is connected to the wall, you may need to carefully cut through any caulk or glue that is holding it in place with a utility knife.
Put Up The New Plasterboard
Put up a new sheet of plasterboard if the space in the wall needs any fixes or changes. To make sure it fits perfectly, carefully measure the space and then cut the plasterboard to the correct size with a utility knife or saw. Use screws to hold the plasterboard in place, and make sure it fits against the wall. Fill in any holes or seams in the new drywall. This will get the wall ready for the finishing touches. Use a plasterboard knife to put a thin layer of joint cement or plaster over the seams and screw heads to make the surface smooth. Thoroughly sand the surface with fine-grit sandpaper to make it smooth after the plaster has dried.
Now that the wall has been cleaned and prepared, it’s time to paint it and add the finishing touches to your newly remodelled space. Choose a paint colour that goes with the rest of the decor in your bathroom, and then use a paintbrush or roller to paint the walls carefully. For a sharp look, make sure the finish is even and smooth. Leave the space as it is, or look for new medicine cabinets from renowned suppliers like Wellfor. You will find a plethora of options that will look great with the overall look of your room. You can get the perfect fit of function, practicality and aesthetics based on your choice and requirements.
Conclusion
Once you have successfully disassembled the medicine cabinet with lights, you can replace it with your chosen cabinet. You can choose something that gives you more space or a design that fits perfectly with the new decor of your room. You may also look for a mirrored medicine cabinet to get the perfect use and aesthetics. Whatever you want to change can easily be achieved once you successfully remove the cabinet. With these simple and easy-to-follow steps, you can take a medicine cabinet out from the wall and turn the area into a sleek, contemporary, and practical space. Whether you’re starting a major renovation or just looking to update your space, learning how to remove a lighted medicine cabinet can give you the freedom to customise and get creative.
Leave a Reply